Epson PowerLite 5500C Projector Review

Epson PowerLite 5500C is a .9 in TFT LCD panel that projects a 19-300 inch image, with up to 16M colors with a resolution of 800×600, with a projection distance of 3.3-50 ft.

FEATURES- SVGA, 3-LCD, Ultraportable Projector, 650 ANSI lumens, 800×600 resolution, 300:1 contrast ratio, and SRS 3D stereo system.

Includes projector, AC cable, ELP computer video cable, MAC video adapter, MAC mouse cable, PS/2 mouse cable, detachable handle, and user manual.

INTERFACE – NTSC: NTSC, Chroma subcarrier frequency 3.58MHz. PAL, PAL-M, PAL-N: CCIR, Chroma subcarrier frequency 4.43MHz.

SECAM: CCIR, Carrier frequency 4.43MHz.

PROJECTION SYSTEM- Epson Original Prism Technology

LCD PANEL – 0.90″ Poly-Silicon TFT, Active Matrix. 1,440,000 pixels, (800×600) x 3 panels. Stripe pixel arrangement.

LENS – Manual zoom lens, focus F = 1.7 to 2.0, f = 37 to 48mm. LAMP – UHP 120 watt (user replaceable), can last about 5 years (based on 8 hours per week x 50 weeks per year). IMAGE SIZE – Diagonal 19 to 300 inches. PROJECTION DISTANCE- 3.3 ft. to 50 ft. (1.1m to 10.5m) PROJECTION METHODS – Front and Rear/upside-down COLORS – 24 bit, 16.7 million colors BRIGHTNESS – (typical) 650 ANSI Lumens ILLUMINATION – (typical) 95% ratio SYNC – Horizontal: 15 – 68kHz Vertical: 50 – 85Hz VIDEO – Signal Level Composite Video: 1Vp-p 75 Ohm S-Video Luminance .714Vp-p Chrominance 0.286Vp-p 75 Ohm

VIDEO SIGNAL RGB – Video Signal level: Analog RGB – 0.71 Vp-p 75 Ohms TTL RGB (accepts 3.3V output level) Sync. Signal level: Separate H,V – TTL RGB Composite – TTL RGB Sync on green- 0.286Vp-p 75 Ohm

AUDIO SIGNAL – Input: Input voltage – 500mVrms Input impedance – 47K Output: Output voltage – 0-500mVrms Output impedance- 600K Ohm

POWER – AC 100 to 120 volt/220 to 240 volt +-10%, 50/60Hz. 220 watt power consumption.

SIZE- 9.3″w x 3.7″h x 13.6″d WT- 9.4 lb. MFR.WARRANTY -1 Year OPTIONS/SUPPLIES- ELPKS14 Hard Case

Leave a Comment

Your email address will not be published. Required fields are marked *