Sony VPD-MX10 Projector Review

Specifications:

OPTICAL Projection system
SIGNALS 
Color system
GENERAL
INPUTS/OUTPUTS 
VIDEO IN
SAFETY REGULATIONS
SUPPLIED ACCESSORIES

INPUT A
DLP™ (1 DMD™ panel) projection system Memory
No. Preset Signal
fH (kHz)
fV (Hz)
H/V
Polarity DMD panel 0.7-inch DMD panel, 786,432 pixels
Projection lens 1.2 times zoom lens, F2.4 to 2.8, f27.5 to 33.0 mm VIDEO 60Hz
Projector Lamp (for replacement)

LMP-M130

Signal Cables

SMF-402

(HD D-sub 15-pin to HD D-sub phono x 3, for component signal)

SMF-421

15.734 59.940 N/N
VIDEO 50Hz 15.625 50.000 N/N
15 K RGB/Component 60 Hz 15.734 59.940 S on G
15 K RGB/Component 50 Hz 15.625 50.000 S on G
640 x 350 VGA mode 1
VGA VESA 85 Hz
PC-9801 Normal
* Images may not be reproduced correctly when signals other than
the above are input.
Lamp 130 W UHP lamp
Screen coverage 40 to 200 inches (viewable area, measured diagonally)
Light output 1000 ANSI lumens*
1Throwing distance
(Screen size*2)
40-inch 1.5 to 1.9 m
60-inch 2.3 to 2.8 m
80-inch 3.1 to 3.7 m
100-inch 3.9 to 4.7 m
120-inch 4.7 to 5.6 m
150-inch 5.9 to 7.1 m
200-inch 7.9 to 9.4 m
NTSC, PAL, SECAM, NTSC 4.43 , PAL-M, PAL-N
Resolution VIDEO: 750 TV lines, RGB: 1024 x 768 pixels
Acceptable signals RGB (fH: 19 to 92 kHz, fV: 48 to 92 Hz),15 kHz component
50/60 Hz system, composite video, Y/C video
Speaker Max. 0.8 W (monaural)
Power requirements AC 100 to 240 V, 50/60 Hz
Power consumption Max. 200 W, Standby 8 W
Dimensions*3
255 (W) x 58 (H) x 228.5 (D) mm (10 1 / 8 x 2 3 / 8 x 9 inches)
Mass Approx. 2.0 kg (4 lb 6 oz)
Heat dissipation 682.5 BTU
Composite Phono, 1.0 Vp-p ±2 dB, sync negative, 7

Y/C IN Mini DIN 4-pin
Y 1.0 Vp-p ±2 dB, sync negative, 7

C Burst 0.286 Vp-p ±2 dB (NTSC), 7
5½ or
0.3 Vp-p ±2 dB (PAL), 7

Analog RGB/Component HD D-sub 15-pin (female)
R/R-Y 0.7 Vp-p ±2 dB, positive, 7

G 0.7 Vp-p ±2 dB, positive, 7

G with Sync/Y 1.0 Vp-p ±2 dB, sync negative, 7

B/B-Y 0.7 Vp-p ±2 dB, positive, 7

SYNC/HD
Composite sync 1.0 to 5.0 Vp-p, high impedance positive/negative
Horizontal sync 1.0 to 5.0 Vp-p, high impedance positive/negative
VD
Vertical sync 1.0 to 5.0 Vp-p, high impedance positive/negative
INPUT B
Digital RGB DVI-D (TMDS)
“Memory Stick” slot x 1
USB HUB Up (B type female) x 1
AUDIO IN Stereo mini jack, 500 mV rms, impedance more than 47

UL, cUL, FCC class B, IC class B,
NEMKO, CE (LVD, EMC), C-Tick, CCIBta
r
Remote Commander RM-PJM11, “Memory Stick” (8 MB),
Monitor Cable, USB Cable: A type to B type, CD-ROM
(Application Software), Carrying Bag, AA size Battery (2),
AC Power Cord, Operation Manual, Quick Reference Sheet

Leave a Comment

Your email address will not be published. Required fields are marked *